|
Determine the extent of contamination under the carpet and mark the area off with masking tape. These areas are nearly always circular in shape, but the size of the areas will vary considerably, sometimes with puddles overlapping one another. You should have ready a spray bottle of our enzymatic digester, a larger container of the same, and a shallow bowl in which to pour. Drawing the liquid from the bowl is the easiest method of filling the injector. Assemble your Injector and draw the digester through the needle into the syringe.
Starting about four inches inside your markings, pierce the carpet backing with the needle and lift the tufts slightly with your other hand. Slide the needle in horizontally between the secondary backing and the top of the pad. Push one ounce, or 30 cc's, into the void. Repeat the procedure each four to six Inches, grid fashion, throughout the contaminated areas until satisfied that you have adequately covered it all. You can expect that one ounce will cover four to six Inches in diameter depending on density of the fabric and thickness of the pad. Generally, you will have to refill your injector many times.
Using your spray bottle, cover the face yarns well and walk around on the entire treatment with your full weight In order to spread and squeeze in the good stuff. When white foam from the digester appears up through the carpet backing beneath, you know it has soaked all of the way through.
We Recommend:
Anti-Icky-Poo Starter Kit
$54.95
Anti-Icky-Poo Starter Kit Pro
$99.95
|
|
|
|
